Buyer is responsible for all of the wrinkles & creases issue if using on a plotter or cutter. This vinyl is not originally designed for plotter or cutter use. Installers must use 3M primer 94 for additional adhesion. This vinyl won't stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. This vinyl is designed for vehicle exterior wrap use ONLY. For the most consistency, please purchase a full roll.įor best result, professional installation is required Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping. Buyers take self responsibility on unsuccessful result on other usage.Īlways pre-test vinyl installation on vehicles.ĭue to different monitors/calibrations, colors may vary slightly from the pictures.įilm colors can vary slightly from roll to roll. Material is specially made for vehicle exterior paint surface in good condition. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. Fluorescent Neon colors tend to fade faster than normal colors. Heat gun or household blow dryer for shaping is required.Įasy to fit in most tight spots or corners (3M primer 94 is required for non sticky surfaces, curves & corners) Low cost to change the look of your vehicles.Įasy installation with dry application method. Lamp type: UVA-3408h UV at (60☒.5)℃ BPT, 0.89 W/ 5h condensation at (50☒.5)℃ BPT, Exposure duration: 52hįlexible and Stretchable for concave area. ![]() Outdoor life: 2 years when followed rules of application and useĪpplication: from +10°С to +20°С, usage from -30°С to +30°Сĭimensional stability: shrinkage less than 5% Indoor life: 5 years when followed rules of application and use Storing period: 2 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place ![]() Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany Glue: Solvent based adhesive, odor: solvent odor (Medium Tack) Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition) ![]() Thickness of film with release liner: 31C☐.5C Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 3-4 Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-340 8h UV at (60☒.5)℃ BPT, 0.89 W/ 4h condensation at (50☒.Thickness of film (C=10 micron): 15C☐.5C Outdoor life: 2 years when followed rules of application and useĪpp lication: from +5°С to +30°С, usage from -30°С to +50°Сĭimensional stability: shrinkage less than 2%īreaking Strength: 23.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-05 6.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04 Indoor life: 3 years when followed rules of application and use Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001) Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. The vinyl film’s highly flexible and stretchable nature allows it to be applied to any surface, curved or flat, without warping the carbon pattern. Type of film : High grade p olymeric calendered vinyl film with air release channelsĪdhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry The thickness of film with release liner: 0.29mm Designed for wrapping smooth surfaces or elements of medium difficulty in wrapping spoilers, mirrors, etc. Reliable polymeric PVC for partial application. Designed for interior and exterior applications. The material is stretchable enough to wrap every edge and recessed area easily. As a proud supplier, TeckWrap has plenty of film selections that have good conformability and durability. With a collection of different styles, TeckWrap offers you this series of carbon fiber that gives your vehicle a stylish finish with a genuine look.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |